MODEL AMJR-14-LN
NETWORK I/O FOR LONWORKS
AddMe® Lite for LonWorks®
|
|
|
|
|
Model AMJR-14-LN
Programmable I/O for LonWorks
• 12 Analog/Universal Inputs
• 2 Discrete Outputs
LonWorks TP/FT-10
Modbus RTU Gateway
|
|
|
| AddMe Lite LonWorks I/O with Modbus RTU Gateway
Order code: 00AMJ14LN
|
List:
$620.00 |
Discontinued
July 1, 2011 |
|
|
|
Click image above for preview of FREE configuration and diagnostic tool for AddMe III. Tool requires Echelon OpenLDV and a supported LonWorks network interface such as i.Lon 100, PCLTA-21, PCC-10, or U10.
|
 |
Echelon USB LonWorks Interface for TP/FT-10 is available on our web site as a convenience. You may also purchase this item from Echelon Corp.
Our price is $115 USD with a qualifying order. Go to Accessories page to order.
|
|
|
Control Solutions’ AddMe® Lite for LonWorks® features 12 inputs which accept analog input from thermistors or 0-10V sensors, or discrete input from dry contact switches. AMJR-14 also provides 2 discrete outputs which can sink 1A at 24VDC.
Network variables for the analog I/O points may be configured for any scalar LonMark SNVT, fixed point or floating point. In addition, analog (universal) inputs may be configured to SNVT_switch with the on threshold programmed via the translation tables. Translation tables allow linearization of type II or type III thermistors or other nonlinear sensors. Either 3K, 10K, or 20K thermistors can be connected directly to analog inputs.
Only LonMark standard variable types and configuration properties are used. The standard LonMark Object plug-in, or LonMaker browser, can be used to do all necessary configuration. Send times for network traffic throttling and heartbeat, send on delta, object override, etc., are all supported per LonMark standards.
• 12 Analog/universal inputs
- - - 0-10VDC, Thermistor, dry contact
- - - Software selectable input type
- - - 10-bit resolution
- - - 2 channels capable of pulse count input
• 2 Discrete outputs
- - - Open drain FET, 1A current sink
• 43 Register Modbus RTU Gateway Built In
• 31 Modbus register read sensor objects
• 12 Modbus register write actuator objects
• LonMark Sensor & Actuator Functional Profiles
• LonMark Certified
• Powered by 10-30VDC or 24VAC 50/60 Hz
• Power Consumption:
- - - 0.15A @ 24VDC max.
• DIN rail mounting, 100mm H x 70mm W x 60mm D
• Pluggable screw terminal blocks
• Operating temperature -40°C to +85°C
• Humidity 5% to 90%
• FCC Class B, CE Mark
|
 |
| The online support package you download right here for free includes help pages in browser format, JavaScript sensor calibration tool, Windows device configuration tool, and PL/i compiler. To review the help pages, just click the image above. To download, go to the Downloads page. |
|
AddMe Lite model AMJR-14-LN is simply a slave I/O node on the LonWorks network until you download a program code file. Our free support software uses LonWorks file transfer to download your code.
AddMe Lite is freely programmable using Control Solutions' PL/i language. The PC based compiler is part of the free configuration tool you download from this web site. |
|
You can configure AddMe manually by writing to LonWorks configuration properties (SCPTs) using LonMaker or equivalent. The free Windows based configuration tool figures writes the properties for you. You simply select options from lists. Click the image below to see the tool close up.
|
|
|
