| BAS-700 Series Analog I/O Modules |
 |
| Click here to download spread sheet for calculating calibration factors for analog inputs. These convert 0-10V or 0-20mA or any intermediate range to engineering units. This spread sheet applies to BAS-700 series analog inputs. AddMe III spread sheet is built into its web pages. |
|
|
|
$145
$185
|
BAS-734 & BAS-738 Analog Input Modules
• 4 Inputs (734) or 8 Inputs (738)
• 12-bit resolution
• Input ranges: 0-10VDC, 4-20mA, 10K type 3 Thermistor
• Channels individually configurable via jumper blocks
• Optional socketed range resistors voltage inputs to 60VDC
• Plug-in screw terminal block
• Snap track mounting, 3.25"H x 1.75"W (734), x 3.30"W (738)
The BAS-730 series of Analog Input modules are configurable to accommodate 0-10VDC, 4-20mA or 10K Thermistor inputs, with each channel individually configurable. In addition, the range resistors for voltage inputs may be optionally socketed to allow channel by channel configuration of full scale input, up to 60VDC.
|
$275
|
BAS-738 (Option 3) Isolated Analog Input Module
• 8 Inputs, optically isolated A/D, on-board DC/DC converter
• 12-bit resolution on ranges of 0-10VDC, 4-20mA, Thermistor
• Same as BAS-738, with isolation added
• Also accepts bipolar input -10V to +10VDC
• Snap track mounting, 3.25"H x 3.30"W
The BAS-738/3 is useful for measurements where common floats at some voltage other than ground. Other than the isolation and bidirectional capability, it is the same as the standard BAS-738.
|
|
$110
|
BAS-742 Analog Output Module
• 2 Outputs individually configurable
• Jumper configurable for 0-10VDC or 4-20mA output ranges
• 4-20mA output drives 250 load max.
• 8-bit DAC resolution
• Jumper selectable potentiometer for manual override of outputs
• Plug-in screw terminal block
• Snap track mounting, 3.25"H x 2.00"W
The BAS-742 Analog Output module is designed to provide the common 0-10VDC or 4-20mA output levels for process control. The output types are individually configurable per channel.
|
Contact sales@csimn.com
for availability |
BAS-748 Analog Output Module
• 8 Current sinking outputs for lighting control
• 0-100mA @ 0-10V
• 8-bit DAC resolution
• Jumper selectable potentiometer for manual override of outputs
• Plug-in screw terminal block
• Snap track mounting, 3.25"H x 4.25"W
The BAS-748 Analog Output module is designed for operation of dimming ballasts in lighting control applications. Its current sinking output is compatible with several commercially available flourescent and HID ballasts.
|
|
When the one size that "fits all" doesn't fit you, create your own size with the BAS-700 series building block approach!
|
|
|
|
|
