| BAS-700 Series Discrete I/O Modules |
|
$95 ea.
$155 ea.
|
BAS-714 & BAS-718 Discrete Input Modules
• 4 Inputs (714) or 8 Inputs (718)
• Optically isolated per channel
• Input range high/low selected per channel by jumper
• AC or DC voltage
• Low range down to 5VDC (TTL level)
• High range up to 120VAC (240VAC by special order)
• Status LED on each input
• Plug-in screw terminal block
• Snap track mounting, 3.25"H x 1.70"W (714), x 3.25"W (718)
The BAS-710 series of Discrete Input modules are configurable for high or low ranges of AC or DC voltages. Your BAS-700 series system can be expanded in increments of 4 or 8 discrete input points using these modules. Inputs are individually optically isolated.
|
Contact sales@csimn.com
for availability. |
BAS-714/400 High Voltage Discrete Input Module
• 4 Inputs, fixed high range
• Optically isolated per channel, AC or DC voltage
• Status LED's on each input
• Input range to 400Vpeak, 277VAC
• Plug-in screw terminal block
• Snap track mounting, 3.25"H x 3.00"W
The BAS-714/400 Discrete Input Module extends the range of discrete inputs to 400 volts peak (400VDC, 277VAC). The BAS-714/400 is designed to sense on/off conditions in commercial lighting or other higher voltage applications. Inputs are optically isolated.
|
$165 ea.
|
BAS-7124 Dry Contact Discrete Input Module
• 24 Inputs sense contact closure to ground
• Each input point provides its own excitation (5V @ 1mA)
• Miniature plug-in screw terminal blocks
• Snap track mounting, 3.25"H x 2.10"W
The BAS-7124 is the highest density input board in the BAS-710 series, with 24 inputs per module. These inputs are restricted to sensing only contact closure to ground using excitation provided by the BAS-7124. The intended application for this module is sensing contact closures for alarm systems.
|
|
$90 ea.
$125 ea.
|
BAS-722 & BAS-724 Discrete Output Modules
• 2 Outputs (722) or 4 Outputs (724)
• Dry contact Form C relays, 3 terminals per I/O point
• 12A load @28VDC or 120VAC
• 6A load @240VAC
• 1500W load with 277V Ballast
• Status LED on each output
• HOA switch for manual override of each output
• Plug-in screw terminal block
• Snap track mounting, 3.25"H x 1.80"W (722), x 3.60"W (724)
The BAS-720 series of Discrete Output modules are designed to handle a wide range of requirements, including AC and DC loads, both high and low voltages, and even lighting system requirements with the 277V ballast rating of the relays used. Relays and plug-in terminal blocks are rated at 12A. NO and NC both provided.
|
$195 ea.
|
BAS-728 Discrete Output Module
• 8 Outputs
• Dry contact Form C relays, 3 terminals per I/O point
• 5A load @28VDC or 120VAC
• Status LED on each output
• Socketed fuse per output (5A fuse)
• Plug-in screw terminal block
• Snap track mounting, 3.25"H x 5.55"W
The BAS-728 is designed to provide higher density discrete outputs, and adds the feature of socketed fuses on-board. The common terminal of the relay contains the fuse, thus both Normally Open and Normally Closed contacts are protected.
|
$125 ea.
|
BAS-728/F Discrete Output Module
• 8 Outputs
• Open Drain FET Output
• 1A load @30VDC
• Status LED on each output
• Thermal & current overload protected
• ESD protected
• Plug-in screw terminal block
• Snap track mounting, 3.25"H x 1.80"W x 3.65"W
The BAS-728/F provides the highest density output module in the BAS-720 series. This module is useful for interfacing to contact inputs of other equipment, or for driving pilot relays or indicators. Each FET is ESD protected, and includes an internal diode protecting it from inductive loads.
|
|
When the one size that "fits all" doesn't fit you, create your own size with the BAS-700 series building block approach!
|
|
|
|
|
