Control Solutions’ Babel Buster 232 LonWorks to RS-232 serial gateway has found a new way to help integrators with high end residential applications. If you want to use your LonWorks system to gain quick, easy access to cost effective X10 based lighting control, the X10 version of the Babel Buster 232 is just what you need.
• LonWorks TP/FT-10 (FTT-10A) to RS-232 Gateway
• Connects 50 SNVT_switch network variables to X10 devices
• 3150L Neuron® Chip, 48K Flash memory, 10K RAM
• TP/FT-10 (FTT-10A) transceiver
• Powered by 10-30VDC or 12-24VAC 50/60 Hz (can be powered by PowerLinc II)
• Power Consumption: 0.1A @ 24VDC
• DIN rail mounting, 100mm H x 70mm W x 60mm D
• Modbus standard RJ-45 connector, RS-232 pin-out
• LED indicators for LonWorks & communication status
• Pluggable screw terminal block for power & LonWorks network
• Operating temperature -40°C to +85°C
• Humidity 5% to 90%
• FCC Class B
• CE Mark
* Requires use of LonMaker or other LonWorks network management tool to configure. Any tool capable of handling LonMark standard configuration properties is suitable. There are no external software requirements unique to the Babel Buster. The Babel Buster comes pre-loaded with the only software it needs.
NOTE: Requires the use of Smarthome PowerLinc II not included in purchase of Babel Buster 232-X10. Visit www.smarthome.com to purchase PowerLinc II component.
To order, click on Add To Cart above, then select -X10 for PowerLinc II as the software option.
| BB232 |
Babel Buster 232 Modbus RTU to LonWorks Gateway - X10 Option |
$319.00 |
|
