BACnet IP to LonWorks Universal Gateway
Maps LonWorks Network Variables to BACnet IP as Analog, Binary, or Multi-State Objects!
• Connect LonWorks devices to a BACnet network
• BACnet IP server includes COV support
|
• 300 Analog Input Objects
• 300 Binary Input Objects
• 300 Multi-State Input Objects
• 100 Analog Output Objects
• 100 Binary Output Objects
• 100 Multi-State Output Objects
• 100 Analog Value Objects
• 100 Binary Value Objects
• 100 Multi-State Value Objects
|
| Control Solutions’ Babel Buster IP/XL is a BACnet IP slave (server) device that functions as a LonWorks device manager. A large number of BACnet objects gives you flexibility in mapping LonWorks Network Variables to any combination of BACnet objects. NV Structures may be parsed to multiple BACnet objects when reading. Multiple BACnet objects may be packed into a single structured variable when writing. All standard SNVT’s are supported.
Objects mapped to Network Variable Outputs (NVO) will poll their assigned variable at the interval you specify. Network Variable Inputs (NVI) are written each time the mapped BACnet object is written. BACnet input objects correspond to NVO’s on the LonWorks device. BACnet output objects correspond to NVI’s on the LonWorks device. BACnet value objects may be mapped to NVI’s for writing without priorities.
Configuration of the IP/XL is done via the embedded web interface. You can upload an XIF file to define the LonWorks device, or in many cases, import the file from the device itself.
• Universal, fully configurable
• No extra software or drivers to buy
• Read/Write any standard LonWorks SNVT via BACnet objects
• 300 Input objects each of types AI, BI, MSI
• 100 Output objects each of types AO, BO, MSO
• 100 Value objects each of types AV, BV, MSV
• BACnet slave polls unbound LonWorks network variables
• Bidirectional communication between BACnet and LonWorks
• Manages NV structures as multiple BACnet objects
• Maps up to 1000 network variables (total, all devices)
• Manages up to 50 LonWorks devices
• Commandable BACnet objects implement priority array
• TP/FT-10A transceiver for LonWorks
• Supports Neuron based nodes (host based excluded)
• 10/100BaseT Ethernet for BACnet IP
• Powered by 10-30VDC or 12-24VAC 50/60 Hz
• Power Consumption: 0.1A @ 24VDC
• DIN rail mounting, 100mm H x 70mm W x 60mm D
• Pluggable screw terminal block for power & RTU network
• Operating temperature -40°C to +85°C; Humidity 5% to 90%
| BBIPXL |
Babel Buster IP/XL LonWorks to BACnet IP Gateway |
$479.00 |
|
A demo copy of the embedded web site contained within the Babel Buster IP/XL is found at the link above. Visit this link for object property summary and hardware guide, in addition to the demo copy of device configuration pages.
All configuration is done via the web pages, eliminating the need for special configuration properties for each object.
|
