Model DM2-LON LogMyData Data Manager is a LonWorks device that acts as a gateway between your LonWorks devices and a central web server such as LogMyData.com. The Data Manager may be programmed for periodic data reporting and event driven rule based alarm reporting. You may log into a single web portal to quickly check the status of any number of Data Managers.

Where do your email notifications come from?

i.CanDoIt® servers have their own built-in email clients. Emails are sent to you directly from the remote device. These emails are triggered by events you program using the simple rule templates in the remote device's web GUI.

LogMyData® Data Managers report events to a central server. This central server generates email notifications sent to you based on events you program using simple rule templates in the central server's web GUI.

When would you want a central server?

Managing a small number of devices that send emails directly is not a big job. But when you have more than just a few devices, you may find it more efficient to log into one web portal to access all of your devices. Not only do you have one central source of email notifications, you have one central place to quickly check the status of all of your remote devices.

Are there other advantages of a central server?

Yes, there is additional peace of mind knowing that if connection to any remote device is ever lost, the central server will send you a notification telling you the device has not reported in recently.

The central server also keeps a historical log of events. You do not have to worry about misplacing an email. You can always check for past events.

LogMyData Data Manager Model DM2-LON

• Universal, fully configurable
• Ready to connect to LogMyData.com Servers

• Read/Write any standard LonWorks Network Variable
• Uses unbound polling of Network Variables
• Automatically recognizes all SNVT's
• Manually configurable for any UNVT
• Network Variable mapping configured via web interface
• Modbus registers may be scaled to engineering units
• Modbus (master) polling interval configurable per point
• TP/FT-10 (Free Topology) LonWorks network
• Supports Neuron based nodes (host based excluded)
• 10/100BaseT Ethernet for Modbus TCP
• Powered by 10-30VDC or 12-24VAC 50/60 Hz
• Power Consumption: 0.15A @ 24VDC
• DIN rail mounting, 100mm H x 70mm W x 60mm D
• Pluggable screw terminal block for power & TP network
• Operating temperature -40°C to +85°C
• Humidity 5% to 90%
• FCC Class A, CE Mark