 |
The Node Object is used to issue requests to all of the sensor and actuator objects, and to check status of those objects.
be configured for the node status nvoStatus. This results in a network heartbeat for the node.
|
 |
The Open Loop Sensor Object is used to process the analog inputs. Send times and send on delta are configurable for each input.
The output value is scaled to 0-100% of input range (0-10V, 4-20mA).
|
 |
The Open Loop Actuator Object is used to process analog outputs. Raw output value is derived from a 0-100% of span input level.
|
 |
The Open Loop Sensor Object is used to process discrete inputs as switches.
Send times are supported. Send on delta is implied by sending on any state change.
|
 |
The Open Loop Actuator Object is used to process discrete outputs. The network variable type is SNVT_switch. |
 |
The Open Loop Sensor Object is used to monitor groups of state inputs. Each object's 64-bit state represents 64 physical inputs. This applies to a BAS-7124 only. |
