Control Solutions is your source for LonWorks I/O.
i.CanDoIt® Guided Tour (p.2)
Device Overview
This set of pages will provide a brief overview of i.CanDoIt® features and functions. Cruise through using the Next and Previous buttons, or skip around using the links at the bottom of the pages.
The i.Board® includes 10 I/O points. The FET outputs drive 24VDC at 1 amp. The analog/universal inputs can be configured for 0-10VDC, thermistor, discrete or dry contact. The inputs will also accept 4-20mA with an external dropping resistor.

Hardware Details

• 8 Analog/universal inputs
- - - 0-10VDC, Thermistor, dry contact
- - - Software selectable input type
- - - 10-bit resolution
- - - 2 channels capable of pulse count input
• 2 Discrete outputs
- - - Open drain FET, 1A current sink
• 10/100BaseT Ethernet (Modbus TCP, SNMP, HTTP, email)
• Event notification via email, SNMP trap, HTTP Get
• Web interface including user HTML wrapper & CGI processing
• User programmable via Script Basic
• Powered by 24VDC (only)
• Power Consumption:
- - - 0.15A @ 24VDC max.
• 38mm H x 52mm W x 103mm D
• Operating temperature -40°C to +85°C
• Humidity 5% to 90%
• FCC Class B, CE Mark

 i.Board® Features a 32-bit ARM Processor

The i.Board® is Control Solutions' answer to customers who said, "We like your products, but can we get something in a smaller, low cost package?" So for all those applications where you need the sophistication of an Internet Appliance but only have a handful of points to monitor, i.Board is the answer.

Control Solutions’ i.Board® with i.CanDoIt® features 8 inputs which accept analog input from thermistors or 0-10V sensors, or discrete input from dry contact switches. i.Board also provides 2 discrete ouputs which can sink 1A at 24VDC.

Input data is presented in scaled integer and floating point format. Linearization tables are provided for 10K and 20K type II, III, and IV thermistors on analog inputs. Input and output type and scaling are configured in web pages served by the internal web server.