Control Solutions’ i.Report™ uses cellular technology to provide wireless remote alarm monitoring of equipment. The architecture is designed to use i.Report to collect remote data on a central server, and provide access to that data via a web portal. The web portal is accessible from an ordinary web browser, using a login name and password. The system is optimized for alarm reporting and notification via email or SMS.

• Web Based Remote Monitoring Package includes...
- - - i.Report GSM/GPRS wireless remote monitoring device
- - - Remote antenna
- - - SIM card
- - - Web portal account
• Web Portal Account includes...
- - - Activated SIM card (AT&T service)
- - - Web portal account setup
- - - One-year subscription to web portal service
- - - Subscription includes wireless air time*

* Air time included, but limited to periodic updates, based on 10KB/day usage. Additional usage billed at $0.01/KB. Most alarm monitoring applications will use under 10KB/day.

Control Solutions’ i.Report is designed to perform data logging and alarm reporting with all data traffic initiated by the wireless device. The i.Report uses HTTP Get requests to a specially configured server to report data. This approach maximizes efficiency of wireless air time. It also provides the highest level of security since i.Report will not accept any incoming Internet traffic. Only replies to initiated traffic are recognized.

Some of the best features of i.CanDoIt® are incorporated into this streamlined adaptation of i.CanDoIt optimized for cellular wireless Internet.

• Global data registers
- - - 60 integer (16-bit) registers
- - - 60 floating point (IEEE 754) registers for scaled data
- - - First 22 data registers allocated to I/O
- - - Next 38 registers dynamically allocated
- - - Registers selectable for HTTP Client reporting
• Event Threshold Rules
- - - 60 event rules each assignable to any data register
- - - High/Low thresholds with hysteresis and minimum times
- - - Optional output activation based on rule
- - - Automatic reporting to server upon active, inactive
- - - Optional time/day of week scheduling of event rules
• SMS Shoulder Tap
- - - i.Report makes periodic HTTP connections
- - - Send SMS to i.Report to request "connect now"
- - - Additional SMS diagnostic support

Additional features of i.Report

• Modbus RTU Support
- - - i.Report defaults to being a Modbus RTU slave
- - - i.Report optionally configurable as Modbus RTU master
- - - Allow PLC to read/write i.Report registers
- - - Allow i.Report to read/write multiple Modbus devices
- - - Event rules may be applied to Modbus data
• User Programmable
- - - Field programmable with PL/i programming language
- - - Remaining registers available for PL/i program
- - - All registers can be read/written by PL/i user program
- - - Create complex threshold rules
- - - Create complex derived data results
• Cellular Data Modem
- - - Quad Band MHz GSM/GPRS
- - - PTCRB and AT&T Wireless approved
- - - SMA antenna connector
- - - Standard SIM card for activation

Additional i.Report Detail