LonWorks Data

This page displays configuration of network variables in devices accessed via the LonWorks network.

Showing to 30of 35
Device Name: AddMe II

NV
#

SNVT Type

NV Name

Data

Status

15	SNVT_volt_f	AnalogInput11_1	Ok
16	SNVT_volt_f	AnalogInput12_1	Ok
17	SNVT_volt_f	AnalogInput13_1	Ok
18	SNVT_volt_f	AnalogInput14_1	Ok
19	SNVT_volt_f	AnalogInput15_1	Ok
20	SNVT_volt_f	AnalogInput16_1	Ok
21	SNVT_count_f	DiscreteInput1_1	Ok
22	SNVT_count_f	DiscreteInput2_1	Ok
23	SNVT_count_f	AnalogOutput1_1	Ok
24	SNVT_count_f	AnalogOutput2_1	Ok
25	SNVT_count_f	AnalogOutput3_1	Ok
26	SNVT_count_f	AnalogOutput4_1	Ok
27	SNVT_switch	DiscreteOutput1_1	Ok
28	SNVT_switch	DiscreteOutput2_1	Ok
29	SNVT_switch	DiscreteOutput3_1	Ok

Quick Help

Data is shown for network variables that are selected as mapped. A device may have more network variables than you have a need to use, therefore only those selected on the LON Variables page will be active. If not mapped, the status will show '---", otherwise status will be "Ok", or "NV fail" if there is a problem communicating that variable.

Click "Next" and "Prev" to scroll through the variables for this device. Click "Next Dev" and "Prev Dev" to scroll through the list of nodes on the network. If the variable is an "nvi" you may enter new data and click Update to send a new value to that variable in the node.