This page displays additional configuration parameters for discrete outputs. Each output has an optional timer associated with it. If outputs should simply turn on and off without qualification, select "No Timer".

Outputs may be pulsed. If "pulse time" is non-zero, the output will be turned on for this amount of time (in seconds), then turned off again. The timer is retriggerable, meaning the output will remain on if updated from some source such as the network writes to the output.

Outputs may be minimum time qualitified. This means once turned on, the output may not go off until the minimum time has been met. Conversely, once turned off, the output may not go on until the minimum time has been met. If the object value is changed to reflect a new state, that state will take effect after the minimum time has timed out (or immediately if already timed out).

To provide a name for a discrete output, enter the name, then click "update".