This page sets up the network address for a remote SNMP device that will be linked to local objects via the client read and client write maps. The local device acts as an SNMP client (manager) to the remote agents listed below.
Device #
IP Address
Local Name: 
SNMP Version
v1 v2c
SNMP Community
Device Status
Default Poll Period
Seconds
Quick Help

Device number simply shows you where you are on the device list. Click "next" and "prev" to scroll through the list.

Remote SNMP devices to be accessed by this device are specified here. Enter the IP address of the remote device, a name to reference in other pages, and a default poll rate. Then click "update".

This gateway expects to access SNMP devices via the standard port 161.

Device status will be a number from 1 to 5 for the following application level error conditions:
1 = could not bind socket
2 = could not build SNMP packet
3 = problem with map, could not parse OID or bad type
4 = response timed out
5 = unable to parse data

Error codes from 80 and up are IP stack errors. Since SNMP uses UDP, which is connection-less, the only likely errors are:

95 = Network is unreachable
107 = Host is unreachable