This page sets up the network address and optional device parameters for a remote Modbus/TCP device that will be linked to for remote input and/or output (via the client read and client write maps). The local device acts as a Modbus master to the remote devices listed below.
Device #
IP Address
 System Name: 
Group Membership
 Group 1Group 2Group 3
Quick Help

Device number simply shows you where you are on the device list. Click "next" and "prev" to scroll through the list.

SNMP managers that traps should be sent to are listed here. The IP address is used to send the trap message. The system name is simply used for display purposes.

Traps, when enabled on the Trap Enable page, are sent to one of three "groups". The IP address shown here may be a member of one or more groups. If a trap is to be sent to a particular group, all members of that group will receive the trap.