The values of data registers contained within this device are displayed on this page, and optionally changed. Simply click the Update button to view the most recent data. Enter a new value and check the Update box if the value should be changed when you click the Update button. Check the Hex box if you wish to view or enter values in hexadecimal (not recommended for floating point).

Integers are 16-bit registers which may be signed or unsigned. Check the unsigned box if the register should be treated as unsigned. This check box is disregarded for floating point registers.

Click Update to view the most recent data values. Click "Prev" or "Next" to scroll through the list of registers. You may also enter a number in the "Showing" box to jump directly to a given register when Update is clicked.

The default data will be stored into the local register when the server times out if the server timeout is set to a non-zero value. A server timeout occurs when this amount of time has elapsed without this register being written by a remote server. This register would be written by a remote server treating Babel Buster SP as a slave device. A remote Modbus/TCP server may access Babel Buster SP any time. A remote Modbus/RTU (serial) server may access Babel Buster SP only when it is configured as a slave.