Convert SNMP to Modbus, Includes Trap Receiver

BBPro-V210 Modbus to SNMP Gateway

Babel Buster

Pro V210

Babel Buster Pro V210 is the most intelligent connection yet between Modbus and SNMP v1 or v2c. The Pro V210 features an automatic table walker and flexible trap receiver that fully supports connecting Modbus to a UPS with an RFC 1628 MIB. Built-in Script Basic with SNMP enhancements provide even greater power and flexibility. The Pro V210 includes Modbus RTU and TCP, master and slave. The Pro V210 includes SNMP client and server, and can send or receive traps. The Pro V210 also provides character string support for Modbus displays.

Learn more...

Convert SNMP to Modbus, Includes Trap Receiver

SPX Pro-V2 Modbus to SNMP Gateway

Babel Buster

SPX Pro V2

Babel Buster SPX Pro V2 is the low cost version of the most intelligent connection yet between Modbus and SNMP v1 or v2c. The SPX Pro V2 features an automatic table walker and flexible trap receiver that fully supports connecting Modbus to a UPS with an RFC 1628 MIB. Built-in Script Basic with SNMP enhancements provide even greater power and flexibility. The SPX Pro V2 includes Modbus RTU and TCP, master and slave. The SPX Pro V2 includes SNMP client and server, and can send or receive traps. The SPX Pro V2 also provides character string support for Modbus displays.

Learn more...

Convert Modbus RTU to TCP, Convert Modbus to SNMP

BB2-6010 Modbus RTU to TCP Gateway, Modbus to SNMP Gateway

Babel Buster

BB2-6010

Babel Buster BB2-6010 is a Modbus to Modbus and a Modbus to SNMP Gateway. The BB2-6010 is more than a protocol translator. It is a self contained server that collects and distributes data according to the rules you create. The most common use of the BB2-6010 is to map Modbus RTU and/or Modbus TCP devices to SNMP. The SNMP manager can use SNMP Get to retrieve contents of any mapped Modbus register. The BB2-6010 generates SNMP Traps upon sensing of “alarm” conditions.

Learn more...

Convert Modbus RTU to TCP, Convert Modbus to SNMP

Babel Buster SPX Modbus RTU to TCP Gateway, Modbus to SNMP Gateway

Babel Buster

SPX

Babel Buster SPX is more than a protocol translator. It is a self contained server that collects and distributes data according to the rules you create. As a serial to Ethernet adapter, the SPX will autonomously poll multiple serial devices and store the data for later forwarding via Modbus TCP, and vice versa. SPX includes Modbus RTU master or slave (user selectable) and Modbus TCP client and server. Virtual device register re-mapping is also supported.

Learn more...


Convert Modbus RTU to BACnet MS/TP

BB2-3010 Modbus RTU to BACnet MS/TP Gateway

Babel Buster

BB2-3010

Babel Buster BB2-3010 is a fully configurable universal Modbus RTU to BACnet MS/TP gateway. The Babel Buster BB2-3010 is an RTU master used to make multiple Modbus RTU RS-485 devices accessible on a BACnet network. The BB2-3010 is also capable of acting as a BACnet MS/TP client and Modbus RTU slave, allowing BACnet devices to be connected to a Modbus network. The BB2-3010 can also be MS/TP slave and Modbus slave at the same time for putting industrial PLC's on a BACnet network.

Learn more...

Convert Modbus TCP to BACnet MS/TP

BB2-3060 Modbus TCP to BACnet MS/TP Gateway

Babel Buster

BB2-3060

Babel Buster BB2-3060 is a fully configurable universal Modbus TCP to BACnet MS/TP gateway. The Babel Buster BB2-3060 is a TCP client (master) used to make multiple Modbus TCP devices accessible on a BACnet network. The BB2-3060 is also capable of acting as a BACnet MS/TP client and Modbus TCP server (slave), allowing BACnet devices to be connected to a Modbus network. The BB2-3060 can also be MS/TP slave and Modbus slave at the same time for putting industrial PLC's on a BACnet network.

Learn more...

Convert Modbus RTU and TCP to BACnet IP, Convert Modbus to SNMP, Connect Modbus to WiFi Sensors

BB2-7010 Modbus RTU and TCP to BACnet IP Gateway

Babel Buster

BB2-7010

Babel Buster BB2-7010 contains up to five different clients and four different servers. The BB2-7010-01 includes BACnet/IP client and server, Modbus TCP client and server (master and slave), and Modbus RTU master and slave. Modbus devices are accessible from BACnet IP and vice versa. The BB2-7010-02 and additional models also include an SNMP client and server (agent), making BACnet data accessible via SNMP or making SNMP devices accessible from BACnet. Additional models include support for collecting data from third party WiFi sensors and controlling WiFi actuators.

Learn more...

Convert Modbus TCP to BACnet IP or MS/TP

BB2-7030 Modbus TCP to BACnet IP or MS/TP Gateway

Babel Buster

BB2-7030

Babel Buster BB2-7030-01 supports Modbus TCP to BACnet MS/TP connectivity as a gateway. It is primarily a BACnet Router, configured or learning, that will route BACnet IP to MS/TP and vice versa via its local ports, and supports full router capability for multi-hop internetworks including via NAT WAN routers. The BB2-7030 is also a client/server gateway that allows remapping BACnet objects from multiple slaves into one master. The model variant BB2-7030-01 includes Modbus TCP support.

Learn more...


Convert Modbus RTU RS-485 to LonWorks

BB2-2010-NB Modbus RTU RS-485 to LonWorks Gateway

Babel Buster

BB2-2010-NB

Babel Buster BB2-2010-NB is a Modbus RTU RS-485 master/slave used to connect LonWorks devices to a Modbus RTU network without binding or LonWorks network management outside of the gateway’s own capabilities. A large number of data objects gives you flexibility in mapping Modbus registers to scalar or structured LonWorks network variables. Multiple registers may be mapped a single structured LonWorks network variable. Modbus holding registers, input registers, discrete inputs, and coils are supported.

Learn more...

Convert Modbus RTU RS-232 to LonWorks

BB2-2011-NB Modbus RTU RS-232 to LonWorks Gateway

Babel Buster

BB2-2011-NB

Babel Buster BB2-2011-NB is a Modbus RTU RS-232 master/slave used to connect LonWorks devices to a Modbus RTU network without binding or LonWorks network management outside of the gateway’s own capabilities. A large number of data objects gives you flexibility in mapping Modbus registers to scalar or structured LonWorks network variables. Multiple registers may be mapped a single structured LonWorks network variable. Modbus holding registers, input registers, discrete inputs, and coils are supported.

Learn more...

Convert Modbus TCP to LonWorks

BB2-6020-NB Modbus TCP to LonWorks Gateway

Babel Buster

BB2-6020-NB

Babel Buster BB2-6020-NB is a Modbus TCP client/server used to connect LonWorks devices to a Modbus TCP network without binding or LonWorks network management outside of the gateway’s own capabilities. A large number of data objects gives you flexibility in mapping Modbus registers to scalar or structured LonWorks network variables. Multiple registers may be mapped a single structured LonWorks network variable. Modbus holding registers, input registers, discrete inputs, and coils are supported.

Learn more...

Convert Modbus RTU to TCP, Convert Modbus to SNMP

Babel Buster SP Modbus RTU to TCP Gateway, Modbus to SNMP Gateway

Babel Buster

SP

Babel Buster SP is more than a protocol translator. It is a self contained server that collects and distributes data according to the rules you create. You can use Babel Buster as an alarm notification device using SNMP traps. The primary applications for Babel Buster SP are serial to Ethernet conversion for Modbus devices, and SNMP access to serial or Ethernet Modbus devices. The Modbus RTU port can operate as master or slave. The Modbus TCP interface can operate as master and slave at the same time. Babel Buster SP is an SNMP agent (does not include SNMP manager). Serial port is RS-485/422 or RS-232.

Learn more...


Non-Mapping Gateways

Convert Modbus RTU to TCP, Direct Pass-through

BB2-6010-GW Modbus RTU to TCP Gateway

Babel Buster

BB2-6010-GW

Babel Buster BB2-6010-GW is a transparent gateway for mapping Modbus RTU devices to Modbus TCP and vice versa. All requests received from an RS-485 master are passed straight through to Ethernet servers. When configured to go the other way, all requests received from an Ethernet client are passed straight through to RS-485 slaves.

Learn more...

Convert Modbus RTU to TCP, Direct Pass-through

Babel Buster SPX-GW Modbus RTU to TCP Gateway

Babel Buster

SPX-GW

Babel Buster SPX-GW is a transparent gateway for mapping Modbus RTU devices to Modbus TCP and vice versa. All requests received from an RS-485 master are passed straight through to Ethernet servers. When configured to go the other way, all requests received from an Ethernet client are passed straight through to RS-485 slaves.

Learn more...

Convert Modbus RTU to TCP, Direct Pass-through

Babel Buster SP-GW Modbus RTU to TCP Gateway

Babel Buster

SP-GW

Babel Buster SP-GW is a transparent gateway for mapping Modbus RTU devices to Modbus TCP and vice versa. All requests received from an RS-485 master are passed straight through to Ethernet servers. When configured to go the other way, all requests received from an Ethernet client are passed straight through to RS-485 slaves.

Learn more...